Philips Sopho 2000 IPS User Manual page 771

To transfer a call from an Attendant or a station to a VMS by dialing of a Single Digit Feature Access Code
"9" or by pushing a function key, while hearing RBT or BT from the destination station:
START
CM08 Specify whether dialing of the Single Digit
Feature Access Code is available or not while
hearing RBT.
Specify whether dialing of the Single Digit
Feature Access Code is available or not while
hearing BT.
CM51 Specify the destination VMS station number
by transferring with Single Digit Feature Ac-
cess Code or a function key.
The first data should be the tenant number of
the destination station called.
CM90 To the DESKCON or the D
tion key to transfer a call to a VMS while hear-
ing RBT or BT, if required.
END
term
To provide a D with One Touch keys to send Called Number + DTMF Signal after the called party an-
swered, for VMS operations (such as "VMS Extension number + Mail Box number or Password"), refer
to the programming (2), (4) in the "STATION SPEED DIALING".
HARDWARE REQUIRED
For interfacing to a VMS with Analog Dialogic Board: LC card
For interfacing to a VMS with Digital Dialogic Board: DLC card
For providing the Single-Line Telephone with a Message Waiting Lamp: 4LCD/8LC card
term
For providing the D
DESCRIPTION
term
, assign a func-
: DLC card
(1) 156: Single Digit Feature Access Code
while hearing RBT
(2) 0 : Available
1 : Not available
(1) 208: Single Digit Feature Access Code
while hearing BT
(2) 0 : Available
1 : Not available
• Y=18 Destination VMS No. assignment
(1) 00-63: Tenant No.
(2) X-XXXXXXXX: VMS Pilot No.
• Y=00
(1) ATTCON No. (E000-E007) +
No.
(2) F6123: Transferring to VMS
(1) My Line No. +
(2) F5001: Transferring to VMS
– 753 –
VOICE MAIL TRANSFER
DATA
,
,
+ Key No.
Page 671, Page 673
NWA-008845-001 Rev.5.0
+ Key
32ch1011.fm