Philips Sopho 2000 IPS User Manual page 284

C
CM74 Assign the number to be dialed to each Memo-
ry Slot number, if required. The numbers to be
called are usually set from individual stations
by their station users.
Assign the station name to be displayed to each
Memory Slot number, by character codes or
character.
END
HARDWARE REQUIRED
term
D with LCD and Soft Key, and DLC card
DESCRIPTION
• Y=0
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) Stored No.:
Outgoing Access Code (Maximum 4 digits)
,
+ + Called Party No. (Maximum 26
digits)
To set a pause into the Stored No., enter
"C" (Fixed Pause=1.5 seconds) or
"D" (Programmable Pause specified by
CM41 Y=0>38) after desired digits.
NONE : No data
• Y=1
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) XX...XX: Station Name Character Code
NONE : No data
See APPENDIX B:
Page B2
• Y=2
(1) X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
(2) XX...XX: Station Name Character by
NONE : No data
– 266 –
DIAL BY NAME
DATA
(Maximum 32 digits, 16 charac-
ters)
Character Code
MAT/CAT (Maximum 16
characters)
NWA-008845-001 Rev.5.0
32ch1005.fm
JANUARY/20/2006
Table.