Off-Premises Extensions - Philips Sopho 2000 IPS User Manual

OFF-PREMISES EXTENSIONS

PROGRAMMING
START
CM10 Assign the station number of Long Line Cir-
cuit (LLC card) to required LEN.
NOTE:
CM14 Assign the station number of Long Line Cir-
cuit (LLC card) to required LEN.
[Series 3200 R6.2 software required]
NOTE:
CM12 Assign the Long Line Circuit (LLC card) to the
station number.
NOTE:
CM13 Remove the PAD on Off-Premises Extensions.
END
HARDWARE REQUIRED
LLC card
-48 V Power Supply (PZ-PW122)
DESCRIPTION
The station number must be as-
signed to the first LEN (Level 0), the
second LEN (Level 1), the third LEN
(Level 2) and the fourth LEN (Level
3) of each LT slot.
The station number must be as-
signed to the first LEN (Level 0), the
second LEN (Level 1), the third LEN
(Level 2) and the fourth LEN (Level
3) of each LT slot.
When using Series 3600 software or
later, a reset of the MP card is not
required.
When changing the data with online,
the data is valid after the LLC card
is unplugged and plugged in with
two seconds or more interval.
(1) 000-763: LEN
(2) X-XXXXXXXX: Station No.
(1) XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) X-XXXXXXXX: Station No.
• Y=17
(1) X-XXXXXXXX: Station No.
(2) 1 : Long Line Circuit (PN-4LLCB)
INITIAL
3 : Short Line Circuit (PN-4LLCB)
• Y=09
(1) X-XXXXXXXX: Station No.
(2) 0: No PAD
– 554 –
OFF-PREMISES EXTENSIONS
DATA
NWA-008845-001 Rev.5.0
DECEMBER/02/2005
32ch1009.fm