Day/Night Mode Change By Station Dialing - Philips Sopho 2000 IPS User Manual

DAY/NIGHT MODE CHANGE BY STATION DIALING

PROGRAMMING
START
CM08 Provide the system with Day/Night Mode
Change by Station Dialing.
CM30 Assign the data for terminating system in Day
Mode/Night Mode/Mode A/Mode B, to each
Loop/Ground Start trunk, respectively.
Assign the station number to be terminated by
DIT in Day Mode/Night Mode/Mode A/Mode
B respectively.
CM65 When using Mode A or Mode B, assign the ter-
minating system Mode change.
CM12 Assign Service Restriction B to each station.
CM15 Allow Day/Night Mode Change by Station Di-
aling in Service Restriction B assigned by
CM12 Y=02.
A
DESCRIPTION
DAY/NIGHT MODE CHANGE BY STATION DIALING
(1) 244: Change of Terminating System
Incoming Trunk
(2) 0: Available
(1) 245: Change Trunk Restriction Class
(2) 0: Available
• Y=02 Day Mode
• Y=03 Night Mode
• Y=40 Mode A
• Y=41 Mode B
(1) 000-255: Trunk No.
(2) 04: Direct-In Termination
• Y=04 Day Mode
• Y=05 Night Mode
• Y=42 Mode A
• Y=43 Mode B
(1) 000-255: Trunk No.
(2) X-XXXXXXXX: Station No.
• Y=29
(1) 00-63: Tenant No.
(2) 0 : Two kinds of mode (Day Mode, Night
Mode)
1 : Four kinds of mode (Day Mode, Night
Mode, Mode A, Mode B)
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
ZZ: 00-15 : Service Restriction Class B
• Y=60
(1) 00-15: Service Restriction Class B as-
(2) 1 : Allow
– 529 –
NIGHT SERVICE
DATA
signed by CM12 Y=02
NWA-008845-001 Rev.5.0
32ch1009.fm