Philips Sopho 2000 IPS User Manual page 341

A
CM35 Assign the data for Direct Outward Dialing to
the Route number assigned by CM30 Y=00.
NOTE: For Resident System Program, refer
to the Command Manual.
B
DESCRIPTION
DIRECT OUTWARD DIALING (DOD)
• Y=00 Kind of Route
(1) 00-63: Trunk Route No.
(2) 00: DDD
01: FX
02: WATS
03: CCSA
• Y=01 Type of Signal
(1) 00-63: Trunk Route No.
(2) 2 : DP
4 : DTMF
7 : DTMF
• Y=02 OG/IC
(1) 00-63: Trunk Route No.
(2) 2 : Outgoing
3 : Bothway
• Y=04 Answer Signal Condition
(1) 00-63: Trunk Route No.
(2) 1 : Answer Signal by Polarity Reversal
7 : No Answer Signal
In case of no Answer Signal, system recognizes
the answer in timing set by CM41 Y=0>03.
• Y=05 Release Signal Condition
(1) 00-63: Trunk Route No.
(2) 0 : No Release Signal from C.O.
1 : Release Signal from C.O.
• Y=08 Dial Pulse Sending
(1) 00-63: Trunk Route No.
(2) 3 : To be sent
• Y=09 Incoming Connection Signalling
(1) 00-63: Trunk Route No.
(2) 01 : Ring Down (Ground Start)
15 : Ring Down (Loop Start)
– 323 –
DATA
NWA-008845-001 Rev.5.0
32ch1006.fm