Chapter 4
Setup and Monitoring via On-Screen Display
Viewing System Information
Proceed as follows to view the System Information screen.
From the Setup Menu screen, select Info and press OK.
The function for the available sub-menus is as follows:
•
•
•
•
•
•
•
•
•
•
OL-31085-01
Version
This menu displays the current and factory loaded application version numbers.
–
Hardware
From this menu, it provides the D9865 receiver's hardware information.
–
Service
This menu displays the channel service information.
–
Channel
–
This menu displays the current channel information.
DVB-CI
–
This menu displays the CAM (Conditional Access Module) Smart Card information for the CI
(Common Interface) slot.
Device Status
–
This menu displays the status of the D9865 receiver.
Active Alarm
This menu lists all the active alarm messages.
–
Active Warning
This menu lists all the active warning messages.
–
RF Status
From this menu, it displays the RF input status.
–
ADP Status
This menu displays the Encrypted and Non-encrypted Addressed Data Packet Count
–
information.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Setup Menu
4-57