To Add A User Account - Cisco D9865 Installation And Configuration Manual

Managing D9865 Web GUI Accounts

To Add a User Account

This feature is available to a user with Admin privileges only.
Proceed as follows to manage user accounts:
From the user interface of the D9865, choose System Settings > Security/Accounts > Account
Step 1
Management. The Account Management page is displayed.
Click Manage User Logins. The Login Accounts page is displayed.
Step 2
Step 3 Click Add to create a new login account.
Note
The Add Login Account window is displayed.
In the Username field, enter a user ID. The new username should not match any of the usernames
Step 4
already defined in the Logins Accounts table.
In the New Password field, enter a password to assign the user ID. The following are rules for creating
Step 5
a new password:
•
•
•
•
Enter the new password again to confirm in the Confirm New Password field.
Step 6
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
5-50
You can create a maximum of 10 user accounts.
It cannot contain any of the Username.
It cannot contain any of the following strings: Cisco, sciatl, ocsic, italics, or any string achieved by
full or partial capitalization of letters.
No letter is repeated more than three times in a row.
Must contain a minimum of four characters.
Chapter 5 Setup and Monitoring via Web GUI
OL-31085-01