Viewing Dvb-Ci Information - Cisco D9865 Installation And Configuration Manual

Setup Menu

Viewing DVB-CI Information

The Common Interface (CI) slot is located behind the door on the front panel. They allow use of a CAM
(Conditional Access Module) Smartcard to decrypt purchased programming.
You must be authorized to view the programming available via the Smart Card from your service
Note
provider.
CAMs must be purchased from Cisco. For a list of the supported CAMs, see
page
For more information on configuring the CI information, see
Information, page
To View the Current DVB-CI Information
Proceed as follows to view the DVB-CI information:
From the Info screen, select DVB-CI and press OK.
The DVB-CI Information screen displays the following information:
DVB-CI Information
CI System Name
CAM Manufacturer
CAM Serial Number
CAM Product Name
CAM Hardware Version
CAM Application Version
CAM Status
S.No/System Name/System ID
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
4-62
3-4.
5-22.
Chapter 4
Description
Indicates the system name of the CAM.
Displays the manufacturer name of the CAM.
Indicates the unique serial number of the CAM.
Displays the product name of the CAM.
Displays the hardware version number of the CAM.
Displays the software version number of the CAM.
Displays the status of the CAM (Ready or Not Ready).
Displays the CA system identification number and name of the
CAM. Some CAMs may support multiple CA system IDs.
Setup and Monitoring via On-Screen Display
Common Interface Modules,
Configuring the Common Interface (CI)
OL-31085-01