Front Panel Leds - Cisco D9865 Installation And Configuration Manual

About the Front Panel
Button
DISPLAY
MENU
SELECT



To change a setting on a menu using the front panel:
Use the
Step 1
the setting.
For numeric options, you can:
Step 2
•
•
To access the menus at the bottom of the screen (for example, Save), navigate to the appropriate selection
Step 3
using the
Press Menu to move to the previous menu.
Step 4

Front Panel LEDs

The functions of the LEDs are described in the table below:
LED
MUTE
SIGNAL
MENU
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
3-2

buttons to move to the setting you want to change. Press the Select button to select

use the buttons to change the value one digit at a time, or
navigate to Keyboard using the

buttons and press Select. A help message is displayed at the bottom of the screen.
Function
On when sound is muted.
On when receiver is synchronized with the incoming digital signal and
authorized for the current channel.
Flashing when a signal has been found, but receiver is not authorized
for the current channel.
Off when no signal has been found. For more information about
troubleshooting your satellite receiver, see
On when on-screen menus are displayed.
Function
Enables the video display output.
When the video display is enabled, the channel number is
displayed on the front panel. When switched off, a "." flashes.
Enters Menu mode or returns to video.
Returns to previous menu.
Selects menus.
Enters or exits edit mode.
In Menu mode, used to navigate menus.
In Video mode, used for volume up/down.
In Video mode, used for channel up/down.

buttons to use an on-screen keyboard.
Chapter 3 Front Panel Operation
Troubleshooting, page 6-13
OL-31085-01