Actual Conversion Table - Cisco D9865 Installation And Configuration Manual

Setup Menu
Selection
Aspect Ratio Convert
Closed Caption
Stream Aspect Ratio
Actual Conversion

Actual Conversion Table

The following table displays the actual conversion performed by the receiver according to your TV
Aspect Ratio selection and the affect on the picture displayed on the TV screen.
TV Aspect
Stream Ratio
4:3 4:3
4:3 4:3
4:3 4:3
4:3 4:3
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
4-28
Options
None
Auto
Auto AFD
16:9 L/B
4:3 P/B
14:9
4:3 CCO
16:9 SCALE
Auto
SA Custom
EIA 708
Type 3
Type 4 SA
Type 4 ATSC
Reserved
DVB 157
4:3, 16:9
Aspect Ratio Actual
Conversion Conversion
None None
Auto None
16:9 L/B None
4:3 CCO None
Chapter 4 Setup and Monitoring via On-Screen Display
Description
This is the conversion that the
receiver will perform on the
incoming signal for the picture to
be displayed correctly (i.e., to
correspond to the aspect ratio of
your TV) on your TV, based on
your selection.
For the actual conversion
performed, refer to Actual
Conversion Table, page
This is the mode of
closed-captioning to use. if there
are multiple in the stream.
SA Custom is not
Note
supported when telecine
video coding is enabled.
This indicates the aspect ratio of
the incoming signal. This is
read-only.
This is the type of (aspect ratio)
conversion the receiver will
perform based on what you have
selected. This is read-only.
Description
Normal Picture
No conversion
Conversion is not possible. Normal
picture.
Conversion is not possible. Normal
picture.
Default
None
4-28.
Auto
Image
OL-31085-01