Cisco D9865 Installation And Configuration Manual page 126

Configuring the Common Interface (CI) Information
If you set by
Stream Type
Stream Type: User
Step 9 If you know the PID number, ensure that you choose PID from the Mode drop-down list and enter the
appropriate PID number. Click Apply.
To enter the stream type, choose Stream from the Mode drop-down list. Choose the stream type from the
Step 10
Stream Category (Vid, Aud, Subt, or TTX), and enter the instance of the stream type in Stream
Instance field. You can enter a range from 1 to 64. Click Apply.
If you do not know the stream type, you can specify a specific hex value as the stream type. Choose
Step 11
Stream from the Mode drop-down list, choose User from the Stream Category drop-down list, enter
the hex value of the stream under Stream Type value (hex) and the instance of the customized stream
type in Stream Instance. You can enter a two digit hexadecimal value for the Stream Type and a range
from 1 to 64 for the Stream Instance. Click Apply.
To delete a record, click the record radio button you want to remove and click Delete.
Step 12
Step 13 Scroll down to view the CI Status information:
The following table describes the CI Status:
CI Status
Sys Name
Comp Name
Manufacture Code
Manufacture ID
Serial Number
Hardware Version
Application Version
CAM Status
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
5-24
Parameter Settings
Set Mode to Stream, select Stream Category (audio, video,
subtitle, ttx, or user) and enter Stream Instance of the stream type.
There is an additional configuration if you select user as the Stream
Category (see below).
Set Mode to Stream, Stream Category to User, manually enter the
stream code in Stream Type Value, and then the Stream Instance
of the stream type.
Description
System name of the CAM.
The company name of the CAM.
The manufacturer's code.
The factory loaded application number of the CAM.
The unique serial number of the CAM.
The hardware version number of the CAM.
The software version number of the CAM.
Status of the CAM (Ready or Not Ready).
Chapter 5 Setup and Monitoring via Web GUI
OL-31085-01