Cisco D9865 Installation And Configuration Manual page 102

Setup Menu
ADP Status
ADP(NON) Passed
ADP(NON) Total Received
Press the blue button (Clear) to clear the total numbers above. To help the operator make accurate
analysis of the receiver's functionality, the ADP(ENC) and ADP(NON) numbers should be cleared.
These same values are also reset whenever the receiver is turned on, reset, or power-cycled.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
4-68
Chapter 4
Description
Indicates the current Non-Encrypted Addressed Data Packet count.
This count indicates the amount of transmitted ADP information
being accurately received and processed. Ideally, the ADP(NON)
Passed and ADP(NON) Total Received numbers should be
identical.
Indicates the total Non-Encrypted Addressed Data Packet count.
This count indicates the amount of transmitted ADP information
being accurately received and processed. Ideally, the ADP(NON)
Passed and ADP(NON) Total Received numbers should be
identical.
Setup and Monitoring via On-Screen Display
OL-31085-01