Setting Up Tuning / Preset - Cisco D9865 Installation And Configuration Manual

Chapter 4 Setup and Monitoring via On-Screen Display

Setting up Tuning / Preset

The Tuning/Preset menu is used to display and configure the current settings.
Proceed as follows to set up the tuning/preset:
From the Setup Menu screen, select Tuning / Preset and press OK.
Step 1
Step 2 The following table describes each of the available options:
Selection
Modulation Type
Downlink (Freq)
Symbol Rate
NetId
OL-31085-01
Options Description
DVB-S Enter the modulation scheme.
DVB-S2
Enter number For C-Band:
Downlink Freq = LO Freq -
L-Band Freq.
For Ku-Band:
Downlink Freq = LO Freq +
L-Band Freq.
1.0 to 45.0 Range for DVB-S in MS/s.
1.0 to 31.0 Range for DVB-S2 in MS/s.
Enter number Obtain the number from your
service provider.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Setup Menu
Default
DVB-S2
12.3
30.0
1
4-15