Cisco D9865 Installation And Configuration Manual page 42

Introducing EPG
Select an upcoming program you want to set a reminder by scrolling through the guide using the
Step 2

information and program time.
Step 3 If the program selected has already started, press Next
Step 4 Press the green button (Set Timer). The Set Timer screen is displayed.
The following table describes the channel information and the timer options:
Channel/Timer Information
Channel Number
Channel Name
Event Name
Day
Start Time
Frequency
Click the green button (Save) to save your timer settings.
Step 5
Note
The following is an example of a reminder that appears on-screen:
Seconds left
before the
program
starts
Press OK to close the reminder window and tune to the specified channel. Otherwise, press Exit to close
the reminder window.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
4-8
buttons and then press OK. The Extended Info screen is displayed with the channel name,
You can set a maximum of 50 timer profiles.
Chapter 4

to set a timer for the next time slot.
Description
Number of the selected channel.
Name of the selected channel.
Name of the selected program.
Day of the week the program will be on the selected channel.
Start time of the selected program.
Set the frequency of the reminder: Once, Daily, Weekly, or
Weekdays.
Setup and Monitoring via On-Screen Display
OL-31085-01