Setting Up Import/Export Information; Viewing Hardware Information - Cisco D9865 Installation And Configuration Manual

Chapter 5 Setup and Monitoring via Web GUI

Viewing Hardware Information

The Hardware Versions area displays the hardware information of the D9865 Satellite Receiver.

Setting Up Import/Export Information

Proceed as follows to configure the import/export information:
Step 1 From the user interface of the D9865, choose System Settings > Settings File > Import/Export. The
Import/Export page is displayed.
In the Device Settings File Transfer area, you can export and/or import device settings and transport
network information.
Step 2 Click the Export Device Settings & Transport Network Information radio button and click Export
to download device settings and transport network information as a file to the designated file folder.
Step 3 Click the Export User Device Settings Only radio button and click Export to download user settings
as a file to the designated file folder.
In the Settings File field, click Browse. The Choose File dialog opens.
Step 4
Step 5 Navigate to the appropriate folder and select the file with a .bkp file extension and click Open.
The Configure Offline FTP Settings File Transfer section has backup and restore controls.
Step 6 In the Settings Filename field, enter the filename of the backup/restore file. You can enter up to 31
characters.
Step 7 In the FTP Server IP Address field, enter the IP address of the FTP server used to restore the
backup/restore file.
In the FTP User Name and FTP Password fields, enter the username and password used to access the
Step 8
FTP server.
OL-31085-01
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Setting Up Import/Export Information
5-47