Viewing The Usage Counters - Cisco D9865 Installation And Configuration Manual

Chapter 5 Setup and Monitoring via Web GUI
The Diagnostic Logs page displays all the system log messages with their dates and times.
Click on the arrow next to Set Date and Time column to sort by date and time.

Viewing the Usage Counters

Proceed as follows to view the usage counters:
From the user interface of the D9865, choose Support > Logs > Usage Counters. The Usage Counters
page is displayed.
The following table describes the Usage Counter information:
Device Status Information
Production Date & Time
Last Power On Date and Time
Lifetime Hours Powered
Lifetime Reset Counter
Clearable Reset Counter
Hours Since Last
Powered-On/Reset
Last Reset Reason
Click Clear Reset Counter to clear the Clearable Reset Counter field and it resets the counter back to
0.
OL-31085-01
Description
Displays the date and time when the receiver was manufactured.
Displays the date and time when the receiver was powered up.
Displays the number of hours since the last power-on.
Displays the total number of times the receiver has been restarted.
Displays the number of restarts since the last time the restart counter
was cleared.
To clear or reset the Clearable Reset Count, click Clear.
Displays the total number of hours that the receiver has been
operating since the last power-on or restart.
Displays the reason for the last restart, i.e., power cycle or manual
reset.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Viewing the Usage Counters
5-55