Viewing Device Status Information; Viewing The Active Alarm And Warning Messages - Cisco D9865 Installation And Configuration Manual

Chapter 4 Setup and Monitoring via On-Screen Display

Viewing Device Status Information

Proceed as follows to view the device status information:
From the Info screen, select Device Status and press OK.
The Device Status Information screen displays the following information:
Device Status Information
Manufactured Date & Time
Last Power On Date & Time
Total Powered On Hours
Hours Since Last Power On
Total Reset Count
Clearable Reset Count
Reset Reason

Viewing the Active Alarm and Warning Messages

To View the Active Alarm Messages
Proceed as follows to view the active alarms:
From the Info screen, select Active Alarm and press OK.
OL-31085-01
Description
Displays the date and time when the receiver was manufactured.
Displays the date and time when the receiver was powered up.
Displays the total number of hours that the receiver has been
operating.
Displays the number of hours since the last power-on.
Displays the total number of times the receiver has been restarted.
Displays the number of restarts since the last time the restart count
was cleared.
To clear or reset the Clearable Reset Count, press the blue button
(ClrRstCnt).
Displays the reason for the last restart, i.e., power cycle or manual
reset.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Setup Menu
4-63