Unicast Ip Setup - Cisco D9865 Installation And Configuration Manual

Factory Default Settings

Unicast IP Setup

By default, the Unicast routes list is empty.
Multicast IP Setup
By default, the Multicast routes list is empty.
Trap Destination Setup
Parameter
Voltage Range
Line Frequency
Power Consumption
LNB Power on satellite input
SNMP
Parameter
Read Community String
Write Community String
System Name (Web GUI only)
System Location (Web GUI only)
System Contact (Web GUI only)
Noise Cutoffs
Parameter
Noise Cutoffs
DVB-S/DVB-S2 TS Cut Off
DVB-S/DVB-S2 TS Restore
DVB-S/DVB-S2 Audio Cut Off
DVB-S/DVB-S2 Audio Restore
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
B-8
Appendix B
Default
100 V to 240 V AC
50/60 Hz
35 W max.
+13 V/+ 18 V @ 350 mA max.
Default
public
public
sysname
Toronto
416-321-XXXX
Default
Enable
0.0 dB
0.1 dB
0.0 dB
0.1 dB
Default Settings
OL-31085-01