Managing D9865 Web Gui Accounts - Cisco D9865 Installation And Configuration Manual

Chapter 5 Setup and Monitoring via Web GUI

Managing D9865 Web GUI Accounts

You can define up to 10 usernames/passwords for login use via Web GUI session on the D9865 Satellite
Receiver.
When a user tries to login, the user is required to provide a username and a password. The user is granted
access only if this username/password pair exists in the authentication table.
The default user is the "Admin User" and is granted special privileges. The Admin user is allowed to add
new users, delete users, change usernames and modify its own password. All other users are only allowed
to modify their own passwords.
To Configure the User Login Passwords
Proceed as follows to change the login password:
From the user interface of the D9865, choose System Settings > Security/Accounts > Account
Step 1
Management. The Account Management page is displayed.
In the Enter Current Password, enter the current login password.
Step 2
In the Enter New Password, enter the new login password.
Step 3
In the Re-enter New Password, enter the new login password again to confirm.
Step 4
Note
Click Apply.
Step 5
OL-31085-01
The Enter New Password and Re-enter New Password should be identical. Each user,
including the admin user, can modify only his own password.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Managing D9865 Web GUI Accounts
5-49