Cisco D9865 Installation And Configuration Manual page 80

Setup Menu
Selection
Network Address
Mask
Gateway Address
The Network Address, Mask, and Gateway Address should be changed together, as a group. The
following table shows the most commonly used Subnet mask values to enter for a chosen IP address
mask, which will depend on the size of your network.
Mask
8
16
24
Step 3 Press the green button (Save) to save your changes.
Editing a Unicast IP Address
In the Unicast IP Setup screen, scroll to the unicast IP you want to edit using the
Step 1
Press OK. The Edit/Delete Unicast IP screen is displayed.
Step 2
Select Edit or press the blue button (Edit). The Add/Edit Unicast IP screen is displayed.
Step 3
Make the necessary changes.
Step 4
Select the green button (Save).
Step 5
Deleting a Unicast IP Address
Step 1 In the Unicast IP Setup screen, scroll to the unicast IP you want to delete using the
Step 2 Press OK. The Edit/Delete Unicast IP screen is displayed.
Select Delete or press the red button (Delete). A message appears to confirm the deletion.
Step 3
Press OK.
Step 4
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
4-46
Options
12 digits in length
(###.###.###.###)
8 to 32
12 digits in length
(###.###.###.###)
Subnet Mask
255.0.0.0
255.255.0.0
255.255.255.0
Chapter 4 Setup and Monitoring via On-Screen Display
Description
Sets the IP Address for its participation in
a Network environment.
Sets the Subnet Mask for its participation
in a Network environment.
Sets the Network Gateway Address on the
Network, used to expose the receiver to a
WAN.

buttons.

buttons.
OL-31085-01