Setting Up Ip Information; To Configure Management And Data Port Settings - Cisco D9865 Installation And Configuration Manual

Setting Up IP Information

Setting Up IP Information

To Configure Management and Data Port Settings

Proceed as follows to configure management and data port settings:
From the user interface of the D9865, click System Settings > System > IP Settings. The IP Settings
page is displayed.
For the Management and Data Port Settings, set the following parameters:
Selection
IP Address
IP Mask
Gateway Address
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
5-36
Description
Sets the IP Address for its participation in a Network environment.
The IP Address is 12 digits in length (###.###.###.###).
Sets Subnet Mask for its participation in a Network environment.
You can enter a value in the range from 8 to 32.
Sets the Network Gateway Address on the Network, used to expose
the receiver to a WAN.
Chapter 5 Setup and Monitoring via Web GUI
OL-31085-01