Cisco D9865 Installation And Configuration Manual page 61

Chapter 4 Setup and Monitoring via On-Screen Display
If an error was made when changing the video settings, you can set the TV video format using the front
Note
panel. For more information, see
Proceed as follows to set up the video information:
From the Setup Menu screen, select Video Setup and click OK.
The following table describes each of the options in the Video Setup screen.
Selection
HD Video Output
SD Video Output
TV Channel
TV Aspect Ratio
OL-31085-01
Setting the TV Video Format, page
Options
Auto
HD 1080i
HD 720p
Auto
PAL-B/G, PAL-D,
PAL-I
PAL-M
PAL-N (AR)
NTSC, NTSC-J
3 or 4 for NTSC
21-69 for PAL
4:3, 16:9
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
3-3.
Description
Receiver automatically detects
correct HD video format.
Sets the HD output video format.
Receiver automatically detects
correct SD video format.
For 625-line systems.
525-line format for Brazil.
625-line format for Argentina.
For 525-line systems.
Sets TV channel for video
display.
The aspect ratio of the intended
TV system.
Setup Menu
Default
Auto
Depends on TV
modulator
installed
3 or 21,
depending on
TV modulator
installed.
4:3
4-27