Viewing Adp Status - Cisco D9865 Installation And Configuration Manual

Chapter 4 Setup and Monitoring via On-Screen Display
Press the blue button (ClrErrCnt) to clear the error counters.

Viewing ADP Status

Proceed as follows to view the ADP Status screen.
From the Info screen, select ADP Status and press OK.
The following table describes the ADP status information displayed:
ADP Status
ISE UA
ADP(ENC) Passed
ADP(ENC) Total Received
OL-31085-01
Description
Indicates the ISE user address (11 decimal characters).
Indicates the current Encrypted Addressed Data Packet Count. This
count indicates the amount of transmitted ADP information being
accurately received and processed. Ideally, the ADP(ENC) Passed
and ADP(ENC) Total Received numbers should be identical.
Indicates the total Encrypted Addressed Data Packet Count. This
count indicates the amount of transmitted ADP information being
accurately received and processed. Ideally, the ADP(ENC) Passed
and ADP(ENC) Total Received numbers should be identical.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Setup Menu
4-67