Setup Menu: Ip - Cisco D9858 Installation And Configuration Manual

Status
Menu Item
Service List Mode
BAT
NIT
SDT
PAT
Frequency Tuning
Re-Acquire
Menu Item
Re-Acquire

Setup Menu: IP

To view the IP menu from the Main menu, press the RIGHT arrow key once and
then the SELECT key to reach the Setup menu. Then, press the RIGHT arrow key
twice and the SELECT key to view the IP menu.
The IP menu allows you to set the parameters for communicating with other
equipment via the Ethernet Data and Management ports for MPEGoIP and MPE
applications and upgrading application software.
Description
Indicates if all the expected
service list tables are present
(Rigorous) or only some of the
service list tables are present
(Degraded)
This is not supported in the
current release.
Indicates whether the Network
Information Table (NIT) is being
used to create the service list.
Indicates whether the Service
Description Table (SDT) is being
used to create the service list.
Indicates whether the Program
Association Table (PAT) is being
used to create the service list.
Indicates whether tuning is
using the NIT to tune to other
transports, or whether tuning is
forced to use the user selected
parameters.
Description
Re-acquires the signal using the
tuning parameters from user
settings.
Parameters
Degraded or Rigorous
No
Yes or No
Yes or No
Yes or No
NIT or User Cfg
Parameters
Abort or Continue. Select Abort to
cancel the operation or choose Continue
to complete the operation.
Setup Menu
69