Quick Setup - Cisco D9800 Getting Started

Basic Vs. Advanced Mode
Auto-Refresh
The system automatically refreshes the Summary Dashboard page every minute. Click Auto Refresh: On/Off
to toggle between enabling or disabling the automatic refresh feature.
Basic Vs. Advanced Mode
All the D9800 features are available in the Advanced mode (default). However, you have the option of limiting
the features available by switching to the Basic mode. The mode option is available at the top right-hand
corner of the D9800 web GUI.
The switch affects all pages, not only the current page.
Note
The following is a list of features that are NOT included in the Basic mode:
• AFC Limit, Input Selection, Polarisation, Orbital Posn, and East/West Flag options in RF Input Selection
• Orbital Validation Status and Orbital Validation Date status fields in the Tuner Performance area of
• Muting Threshold, Disaster Recovery, Disaster Recovery Status, Channel Selection, Cue Tone
• CI Component Setup in CI Setup page.

Quick Setup

The following table provides the most common tasks to initially configure the D9800 Network Transport
Receiver.
Task
Setting up the Network Connection
Tuning to an RF
Tuning to the MPEGoIP
Input
Cisco D9800 Network Transport Receiver Version 3.11 Installation and Configuration Guide
10
area of the RF Input Setup page.
the RF Input Setup page.
(single-stream only), and Decode Enable (single-stream only) menu options.
Input, Tuning to the ASI
Input, or
Description
Set up the network connection.
Input, Acquire and configure one of the following inputs:
Tuning to the ABR RF, ASI, IP, or ABR.
Getting Started