To Enter The User Password - Cisco Prisma II Installation Manual

Chapter 3 Operation using ICIM

To Enter the User Password

To use the user password feature, you must create and enter a password of exactly
eight digits using only the 0-9 number keys.
The password remains active for 10 minutes after your last keystroke. To change
configuration parameters after 10 minutes, you must re-enter your password.
Complete the following steps to enter a user password.
1 Access the Password menu as shown in To Access the Password Menu (on page
83).
2 Press the
3 When User Psw/Shift Off appears, press the
then enter the eight digits of your password, using the 0-9 number keys.

To change a digit you have just typed, use the CAN (Cancel) function by
pressing the
4 Press the
updates to show whether your password entry was accepted.

If the password is accepted, the word Accepted appears in the menu, and
you are able to return to the MAIN menu.

If the password was rejected, the word Rejected appears in the menu.
Reasons for a password to be rejected include:
–
–
–
If the password is rejected, press the
menu and re-enter the password as described in step 3 above.
84
key. The user password menu appears.
key. This deletes the last digit typed.
key to enter the password. The ICIM2 or ICIM2-XD display
Entering more than eight digits for the password.
Pressing keys other than the 0-9 number keys.
Entering an incorrect password if a valid password has been entered.
key to display Shift On, and
key to return to the password