Setting Up Advanced User Settings - Cisco D9865 Installation And Operation Manual

Setting up Advanced User Settings

To Set Up the Advanced User Settings
Proceed as follows to set up the advanced user settings:
1. From the Advanced Setup screen, select Administration and press OK.
2. The following table describes each of the options:
Selection
POV Mode
Lock level
4035197 Rev C
Options
Standard
Open
Advanced
0 to 3
D9865 Satellite Receiver Installation and Operation Guide
Description
Configures the network controls to the
following pre-defined settings:
CA Mode - Std
Acquisition Mode - Basic
Configures the network controls to the
following pre-defined settings:
CA Mode - Open
Acquisition mode - Auto
Enables the POVAdv menu option,
allowing you to customize the CA
Mode and Acquisition settings. For
more information, see Setting up POV
Mode, on page 4-50.
Restricts access and prevents
unauthorized changes to receiver
settings.
For details on changing the lock level,
see Changing the Lock Level, on
page 4-47.
Default
Standard
0
4-45