Sony CXD5602 User Manual page 273

0x2024 N1_W_S
0x2028 N2_W_S
0x202C N3_W_S
0x2030 N4_W_S
0x2034 N5_W_S
0x2038 N6_W_S
0x203C N7_W_S
0x2040 V0_W_C
0x2044 V1_W_C
0x2048 V2_W_C
0x204C V3_W_C
0x2050 V4_W_C
0x2054 V5_W_C
0x2058 V6_W_C
0x205C V7_W_C
0x2060 V8_W_C
0x2064 V9_W_C
Among the FIFO access space (Addresses 0x2000 to 0x2FFF), the addresses not shown in Table SCU (Sensor
Control Unit)-103 are Reserved and are writing-invalid (no error response) and 0 read during readout (no error
response).
Since the Random Access partition has a non-FIFO structure, it does not have physical writing ports or physical
readout ports.
3.9.8.4 Decimation Partition
The Decimation partition stores the data that was decimation-processed by the MATH_PROC. There are two
sets of Decimation partitions, each of which is comprised of four sub-partitions.
Within each sub-partition of the Decimation partition, data can be stored as either Calculation Operable Sample
Type or Calculation Inoperable Sample Type but when performing decimation or arithmetic processing,
Calculation Operable Sample Type must be used.
The Decimation partition can only be written from the internal sequencer of the SCU, and writing from the
CPU or Host is prohibited. The four sub-partitions within a certain Decimation partition stores sample data that
differs in terms of decimation rate based on the same sample data.
The Decimation partition has four different readout ports per partition, each to which one of the four
sub-partitions can be assigned according to the setting.
0x2124 N5_R1_C
0x2128 N6_R1_C
0x212C N7_R1_C
0x2130 D0_R3_CH
0x2134 D1_R3_CH
0x2138 D0_R0_H
0x213C D1_R1_H
0x2140 N0_R0_H
0x2144 N1_R0_H
0x2148 N2_R0_H
0x214C N3_R0_H
0x2150 N4_R0_H
0x2154 N5_R0_H
0x2158 N6_R0_H
0x215C N7_R0_H
－273/1010－
0x2184 V9_R_H
CXD5602 User Manual