Sony CXD5602 User Manual page 808

Each bit of this parameter can be rewritten when the ADC is in operation.
3.9.12.11.11 FIFO_WRITE_EVENT_CTRL_n
OFFSET: 0x0280 + n x 0x04 (n = 0, ..., 14)
NAME Field Name
FIFO_WRITE_ Reserved
EVENT_CTRL
OUTPUT_8BITS
_n
Reserved
WRITE_SAMPLE_NUM
Reserved
EVENT_ID
Reserved
WRITE_CTRL
Each bit of this parameter cannot be rewritten when the corresponding sequencer n is in operation.
OFST [29:20]
Table SCU (Sensor Control Unit)-695
Bit RW
[31:25]
[24] RW
[23:20]
[19:8] RW
[7:6]
[5:4]
[3:2]
[1:0]
－808/1010－
RW n =0: LPADC0 offset value (X)
n = 1: LPADC1 offset value (X)
n = 2: LPADC2 offset value (X)
n = 3: LPADC3 offset value (X)
n = 4: HPADC0 offset value (X)
n = 5: HPADC0 offset value (Y)
n = 6: HPADC1 offset value (X)
Description
Reserved
Set to "1" when writing only the upper 8 bits of the results
from the Math Function to the FIFO.
Reserved
When WRITE_CTRL is "2", if selected condition is
satisfied, the number of samples selected here are written to
the FIFO. "0" means one time. (0 to 4095)
Reserved
When WRITE_CTRL is "1" or "2", the condition ID
selected here is referenced. Select from 0 to 2.
Reserved
0: Always writes.
1: Does not write until the condition selected by the
EVENT_ID is satisfied, and starts writing after the
condition is satisfied.
2: Writes until the condition selected by the EVENT_ID is
satisfied, and after the condition is satisfied, writes the
number of samples selected by WRITE_SAMPLE_NUM.
3: Never writes (assumes use only for conditional
statement)
CXD5602 User Manual