Sony CXD5602 User Manual page 257

Table SCU (Sensor Control Unit)-98 and Table SCU (Sensor Control Unit)-99 show the interrupt factors that
are ORed within the SCU.
Interrupt Name Number
LPADC_ALMO 4 (n = 0, ...,
*
ST_FULLn 3)
HPADCn_ALM 2 (n = 1, 2)
OST_FULL
MATH_EVENT 3 (n = 0, 1,
n_R 2)
D0_Rn_C_ALM 2 (n = 1, 2)
OST_FULL
D1_Rn_C_ALM 2 (n = 1, 2)
OST_FULL
Nn_R1_C_ALM 8 (n = 0, ...,
OST_FULL 7)
Dn_R3_CH_AL 2 (n = 0, 1)
MOST_FULL
ISOPn 4 (n = 0, ...
3)
MATH_EVENT 3 (n = 0, 1,
n_F 2)
PWMn_INVALI 8 (n = 0, ...,
D_VALUE 7)
Note: As for the name of the interrupt for LPADC ch.0, the n is not "0" but is left blank.
Table SCU (Sensor Control Unit)-90 Information Interrupts
Description
The data amount stored in the FIFO for the "n" th channel of the LPADC
within the ADCIF has reached the Watermark
The data amount stored in the FIFO for the "n" th channel of the HPADC
within the ADCIF has reached the Watermark
Rise Event of the Math Function n within the MATH_PROC
The data amount stored in the FIFO partition D0_Rn has reached the
Watermark
The data amount stored in the FIFO partition D1_Rn has reached the
Watermark
The data amount stored in the FIFO partition Nn_R1 has reached the
Watermark
The data amount stored in the FIFO partition Dn_R3 has reached the
Watermark
Interrupt n from the internal sequencer
Fall Event of Math Function n within the MATH_PROC
PWMn timer mode interrupt
－257/1010－
CXD5602 User Manual
Edge/L
evel
Selecta
ble
Selecta
ble
Edge
Selecta
ble
Selecta
ble
Selecta
ble
Selecta
ble
Selecta
ble
Edge
Edge