Siemens Sinumerik 840D sl Diagnostic Manual page 564

Overview of Alarms
HMI-Alarms
100303 Paging not possible
Definitions: You cannot page over, for example, axes, drives or channels, as more axes, drives or channels are
not configured.
Remedy: --
100304 '%1' not found.
Parameters: %1 = --
Definitions: --
Remedy: --
100350 Display MD saved
Definitions: - The display machine data is saved via the softkey "Save" in the operating
area start-up, image machine data - display
machine data.
- The display machine data is saved in the start-up basic display after
pressing the softkey "LCD brighter" or "LCD darker" (this setting will remain at the next start-up).
- As of SW 4.1: If the display options are changed in the machine data images,
the change will be saved in the display machine data that is not visible to the user.
Remedy: --
100351 Display MD cannot be accepted
Definitions: Saving the display machine data was rejected by the NCK.
Remedy: --
100360 Logic drive data saved
Definitions: --
Remedy: --
100361 Error on saving logic drive data
Definitions: --
Remedy: --
100362 Please wait, saving data
Definitions: --
Remedy: --
100363 Password has been changed, please confirm first
Definitions: --
Remedy: --
100402 Temporarily no access rights %1 !
Parameters: %1 = --
Definitions: --
Remedy: --
100403 No access rights %1 !
Parameters: %1 = --
Definitions: --
Remedy: --
100405 Error var. access: Variable address wrong %1
Parameters: %1 = --
Definitions: --
Remedy: --
100406 Error var. access: Format unknown %1
Parameters: %1 = --
Definitions: --
Remedy: --
2-564
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009