Siemens Sinumerik 840D sl Diagnostic Manual page 592

Overview of Alarms
HMI-Alarms
Definitions: The workpiece name entered is already in this directory.
Remedy: --
105004 Paste buffer is empty! First COPY then PASTE
Definitions: No file could be inserted, as no file was copied to the clipboard.
Remedy: --
105005 Only tools can be inserted here
Definitions: The file type of the previously copied file is not _wpd and cannot be inserted into
the workpiece directory.
Remedy: --
105006 Only files can be inserted here
Definitions: A file of the file type _wpd, i.e. a workpiece, was copied from the workpiece directory and an attempt
was made to insert it into a program directory.
Remedy: --
105007 No name entered
Definitions: --
Remedy: Wait until the loading procedure is terminated.
105008 Write memory error on cycle call
Definitions: The resources of the HMI are exhausted.
No more dynamic memory is available.
Remedy: --
105009 No write access to data
Definitions: The file is write-protected.
Remedy: --
105010 No data selected
Definitions: The cursor is not placed on a valid file name.
Remedy: --
105011 Cycles overview %1 not available
Parameters: %1 = --
Definitions: The cycle description sc.com was not found in the NCK file system.
Remedy: --
105012 Program not or only partially editable (NC Reset)
Definitions: The selected program is currently being executed.
Remedy: --
105013 Copied data can be inserted with SK 'Paste'
Definitions: The copied data is in the clipboard and can be inserted anywhere via the softkey "Paste".
Remedy: --
105014 Error on copying ! %1
Parameters: %1 = --
Definitions: The file could not be copied.
Remedy: --
105015 Error on renaming ! %1
Parameters: %1 = --
Definitions: The file could not be renamed.
Remedy: --
105016 Error on deleting ! %1
Parameters: %1 = --
Definitions: The file could not be deleted.
2-592
SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 03/2009
© Siemens AG 2009 All Rights Reserved
03/2009