NorthStar 961 Reference Manual page 297

Adjusting the
cursor pad
961/962 Operations and Reference Manual, Rev. A
the CHART screen. Turning off waypoint names is useful for
eliminating clutter, especially because names may overlap
when you're displaying an area with multiple waypoints
grouped closely together.
To set the CHART-screen display of waypoint symbols:
1. At the CHART SETUP screen, press the WAYPTS key.
2. At the second CHART SETUP screen, press the CURSOR
PAD to highlight the WAYPT DISPLAY field, then press
the EDIT key.
3. Press the CURSOR PAD left or right or press the LEFT
ARROW or RIGHT ARROW keys to select either SYMBOL
or OFF.
4. When done, press the ACCEPT key.
5. Press RETURN twice to go back to the SETUP MENU
screen.
To set the CHART-screen display of waypoint names:
1. At the CHART SETUP screen, press the WAYPTS key.
2. At the second CHART SETUP screen, press the CURSOR
PAD to highlight the WAYPT DISPLAY field, then press
the EDIT key.
3. Press the CURSOR PAD left or right or press the LEFT
ARROW or RIGHT ARROW keys to select either NAME/
SYMBOL, or SYMBOL (no names).
4. When done, press the ACCEPT key (or CANCEL to leave
the option unchanged).
5. Press RETURN twice to go back to the SETUP MENU
screen.
The CURSOR PAD has three stages for controlling the cursor's
speed on the CHART screen: stage 1, stage 2, and stage 3. You
can set each of these stages from slow (1) to fast (7). For
example: if you like a slow cursor you'd set these stages to a
slower speed; if you like a fast cursor you'd set these stages to
a faster speed.
Once pressed, the CURSOR PAD has two "delay" stages when
switching from stage 1 to 2 and from stage 2 to 3. You can set
Chapter 13 - Customizing Setup Functions
Page 13-27