NorthStar 961 Reference Manual page 126

Chapter 4 - Understanding the Chart Screen
Page 4-34
box appears—depending on whether you selected a route
leg or a trip leg, respectively.
2. Press the EDIT key.
The CHART screen appears, showing the selected route
leg or trip leg.
3. Press the CURSOR PAD to move the cursor to the desired
location of the waypoint to be inserted.
The tentative location of the new route or trip leg is
displayed.
4. Press the DONE key to insert the new point (or press the
CANCEL key to cancel).
The CHART screen appears, showing the new point
inserted into the selected route leg or trip leg.
Editing a waypoint
You can select an existing waypoint, route point, or trip point
on the CHART screen, and move it to another location:
1. On the CHART screen, press the CURSOR PAD to select a
waypoint. If necessary, to select a named waypoint or a
waypoint that's part of a route or trip, press the LEFT
ARROW key or RIGHT ARROW key.
2. Press the CURSOR menu key.
The SELECTED WAYPOINT dialog box appears. If
you've selected a trip point or a route point instead of a
named waypoint, this box will be named SELECTED TRIP
POINT or SELECTED ROUTE POINT.
961/962 Operations and Reference Manual, Rev. A