Chapter 10 - Waypoint and Route Navigation
Using
point-and-shoot
navigation
Page 10-14
Often, point-and-shoot navigation is the easiest and most
powerful way of travelling to waypoints. This method also
gives you flexibility in deciding where to travel. Using the
CURSOR key, this method lets you do any of the following:
select existing waypoints on the CHART screen and
•
navigate to them one at a time, or add them to the end of
your trip
•
create and navigate to entirely new waypoints (the cursor
locations), or add them to the end of your trip
Going to an existing waypoint
1. Press the CURSOR PAD to select a waypoint on the
CHART screen, then press the CURSOR menu key.
The SELECTED WAYPOINT dialog box appears.
2. Press the GO NOW key.
The CHART screen appears, and guides you directly to
this designated waypoint.
Selected waypoint dialog box
961/962 Operations and Reference Manual, Rev. A