NorthStar 961 Reference Manual page 78

Chapter 3 - Using the Controls
A waypoint is a
specific position
defined by either its
lat/lon, TDs, or
distance and bearing
from some position fix.
Page 3-20
The WAYPTS/ROUTES key controls four functions; each
keypress displays a separate screen in the following order:
1. Waypoints
2. Routes
3. Tracks
4. Avoidance points
On these list screens, you can select each waypoint, route,
track, or avoidance point by pressing the up and down arrows
of the CURSOR PAD; the currently selected waypoint, route,
track, or avoidance point is indicated by a horizontal stripe.
Waypoints screen
The WAYPOINTS screen lists all your stored, named waypoints
by symbol; name; distance and bearing; and lat/lon or TDs (the
distance and bearing fields are completely blank if there's no
position fix). Until you store user-defined waypoints in the
database, the WAYPOINTS screen will be blank.
961/962 Operations and Reference Manual, Rev. A
Waypoints screen