NorthStar 961 Reference Manual page 147

Chapter 6 - Creating Waypoints
List display Displaying waypoints on the waypoints screen
To display a list of named waypoints, press the WAYPTS/
ROUTES key until you reach the WAYPOINTS screen.
Waypoints screen
The WAYPOINTS screen lists all your existing waypoints,
showing symbol, name, distance from your present position,
bearing, and lat/lon or TDs and GRI.
To select a waypoint (indicated by the horizontal stripe), press
the CURSOR PAD up or down.
To the right of the LONGITUDE column is a red vertical slide
bar, which is relative to the size of the list of waypoints. The
smaller the slider, the larger the list; the larger the slider, the
smaller the list. The slider also indicates your relative position
in the list.
In addition to the WAYPOINTS and CHART screens, you also
Other displays of
can display past, active, and future waypoints in today's trip
waypoints
(on the TRIP screen), and you can display the active waypoint
(the waypoint you're navigating to) on the CHART screen
INFO BARs and on both STEER screens. These screens are
961/962 Operations and Reference Manual, Rev. A Page 6-5