NorthStar 961 Reference Manual page 185

961/962 Operations and Reference Manual, Rev. A
2. If desired, use the KEYPAD to change the coordinates.
Press the STORE AS WAYPT/ROUTE key.
The STORE AS A WAYPOINT dialog box appears,
supplying a default waypoint name and a default route
name starting with the letter R.
3. To name the first waypoint of the route, use the KEYPAD
to enter a name in the NAME field, or use the default
waypoint name. Waypoint names can have up to nine
characters. If you make a mistake during data entry, press
the CLEAR ENTRY key.
4. To name the route, press the CURSOR PAD up to move
the cursor to the ROUTE NAME field, then use the
KEYPAD to enter a route name. Route names can have up
to 15 characters and must be unique. If you use the
default route name, you can always change the name
later on the ROUTES screen.
5. Press the MAKE NEW ROUTE key (or press the RETURN
key to cancel).
The CHART screen appears, and a new route with one
route waypoint is established.
Chapter 8 - Creating Routes
Store as a waypoint dialog box
Page 8-9