Loading, Updating, And Deleting Charts - NorthStar 961 Reference Manual

Past trip legs
Chart update
regions on ARCS
charts

Loading, updating, and deleting charts

961/962 Operations and Reference Manual, Rev. A
If the CHART screen gets cluttered with past trip points and
legs, which are displayed in yellow, you can turn off their
display.
To change the PAST TRIP LEGS setting:
1. At the CHART SETUP screen, press the CURSOR PAD to
highlight the PAST TRIP LEGS option, then press the
EDIT key.
2. Press the CURSOR PAD left or right or press the LEFT
ARROW or RIGHT ARROW keys to select either ON or
OFF.
3. Press the ACCEPT key (or CANCEL to leave the option
unchanged).
4. Press RETURN to go back to the SETUP MENU screen.
You can turn on or off the display of regions on the CHART
screen showing where the chart has been updated.
To change the SHOW UPDATE REGION setting:
1. At the CHART SETUP screen, press the CURSOR PAD to
highlight the SHOW UPDATE REGION option, then press
the EDIT key.
2. Press the CURSOR PAD left or right or press the LEFT
ARROW or RIGHT ARROW keys to select either ON or
OFF.
3. Press the ACCEPT key (or CANCEL to leave the option
unchanged).
4. Press RETURN to go back to the SETUP MENU screen.
The CD-ROM drive is used to install charts onto the 961/962.
These charts can include either of the following types:
• BSB-formatted, ChartPack and ChartKit charts (CDs
available from Northstar dealers, Maptech, or NDI).
• HCRF charts, such as ARCS charts (CDs available from
ARCS agents/distributors)
Chapter 13 - Customizing Setup Functions
Page 13-35