NorthStar 961 Reference Manual page 119

961/962 Operations and Reference Manual, Rev. A
To edit this route or follow it now, press the WAYPTS/
ROUTES key until you reach the ROUTES screen, then
press the EDIT key (to edit the route) or FOLLOW key (to
follow it now).
For details about displaying a different route on the
see "Displaying a route on the chart screen" starting on page 8-3.
Going to a selected route point
To select the desired route point, you may want to use the
LEFT ARROW and RIGHT ARROW keys to highlight a route
"point," not a named waypoint. Why? If you select, for
example, POINT 3 from the route, you'll follow the remainder
of the route after POINT 3. Instead, if you select a named
waypoint from the route, for example, WAYPT D, you'll
navigate only to that named waypoint.
To go directly to an existing route point and continue along
the displayed route (remember to first display the route on the
CHART screen; see "Displaying a route on the chart screen"
starting on page 8-3):
1. On the CHART screen, press the CURSOR PAD to select
the desired route point (use the ARROW keys, if
necessary), then press the CURSOR menu key.
The SELECTED ROUTE POINT dialog box appears.
Chapter 4 - Understanding the Chart Screen
NOTE:
CHART
screen,
Page 4-27