Creating A New Track - NorthStar 961 Reference Manual

Creating a new track

Creating a track by
defining start and
end date/time
961/962 Operations and Reference Manual, Rev. A
You can create and store multiple tracks to the database.
There are two ways to create and store a new track:
pressing the NEW TRACK key to define the track's start
•
and end times on the TRACKS screen
pressing the START SAVING key to immediately start
•
defining a new track now
To create a new track by start and end date/time:
1. Press the WAYPTS/ROUTES key to access the TRACKS
screen, then press the NEW TRACK key.
A field for the new track appears on the screen, and the
cursor goes to the NAME field. The END field is set to the
present date and time, and the START field is set to 24
hours earlier than now.
2. Use the KEYPAD to enter a name for the new track (or use
the default name, which starts with a T followed by four
digits). The name can be up to 15 characters.
Chapter 9 - Creating Tracks
New track screen
Page 9-7