NorthStar 961 Reference Manual page 117

961/962 Operations and Reference Manual, Rev. A
2. If desired, use the KEYPAD to change the coordinates; if
not, press the STORE AS WAYPT/ROUTE key.
The STORE AS A WAYPOINT dialog box appears,
supplying a default waypoint name starting with the letter
W, and a default route name starting with the letter R.
3. To name the first waypoint of the route, use the KEYPAD
to enter a name in the WAYPOINT NAME field, or use the
default waypoint name. Waypoint names can have up to
nine characters. To clear the entire NAME field during
data entry, press the CLEAR ENTRY key.
4. To name the route, press the CURSOR PAD up to move
the cursor to the ROUTE NAME field, then use the
KEYPAD to enter a route name (route names can have up
to 15 characters). If you use the default route name, you
can always change the name later on the ROUTES screen.
5. Press the MAKE NEW ROUTE key (or press the RETURN
key to cancel).
The CHART screen appears, and a new route with one
route waypoint is established.
Chapter 4 - Understanding the Chart Screen
Store as a waypoint dialog box
Page 4-25