NorthStar 961 Reference Manual page 357

961/962 Operations and Reference Manual, Rev. A
>
To save only your setup and service options (user
preferences), press the USER PREFERENCE key.
>
To save only your waypoints and routes, press the
WAYPOINTS AND ROUTES key (waypoints and routes
are always saved together since routes are composed of
waypoints).
To save all of the above, press the ALL key.
>
The SAVE DATA dialog box appears, defined as either
user preference data, waypoint and route data, or all data,
depending on which of the above options you chose.
3. Insert the disk into the drive (either a floppy disk or a zip
disk), then press the CONFIRM key.
The SAVING DATA dialog box appears (defined as either
user preference data, waypoint and route data, or all
data), asking you to wait while data is saved. This dialog
box is followed by the SUMMARY OF DATA SAVED
dialog box showing the number of files saved.
4. Press the CONFIRM key to return to the DATABASE
FUNCTION screen.
Restoring a database
Remember: Restoring a database will overwrite your existing
database.
To restore a previously saved database:
1. Press the STAR key until you reach the SERVICE MENU
screen, then press the DATABASES AND LOG key.
2. At the DATABASE FUNCTION screen, press the RESTORE
DATABASES key. This key only appears after you've
saved a database (because a database that hasn't been
saved can't be restored).
The SELECT DATABASE TO RESTORE dialog box
appears.
Chapter 14 - Service and Maintenance Functions
Page 14-13