NorthStar 961 Reference Manual page 223

961/962 Operations and Reference Manual, Rev. A
2. Press the FOLLOW NOW key.
The CHART screen appears, and navigation begins
directly to the selected waypoint. Your XTE starts at zero
because you're right on the course line to the waypoint. To
see the route in the trip, press the TRIP key (you may
have to press the CURSOR PAD down to scroll through
the future waypoints).
Joining a leg of a route
You can join a route leg and follow the rest of the route, rather
than go directly to a waypoint:
1. At the FOLLOW ROUTE screen, press the CURSOR PAD
up or down to select the route leg you want to join. Note
that you can reverse the direction of the selected route by
pressing the REVERSE DIR key.
2. Press the JOIN NOW key.
You're asked to confirm that you'll remember to press the
SAVE key to store the point where you join the leg.
Chapter 10 - Waypoint and Route Navigation
Join leg dialog box
Page 10-9