NorthStar 961 Reference Manual page 122

Chapter 4 - Understanding the Chart Screen
Page 4-30
Adding a selected route to the end of your trip
You can add an entire route, or only part of a route, to the end
of your trip (remember to first display the route on the CHART
screen; see "Displaying a route on the chart screen" starting on
page 8-3):
1. To add the entire route, move the cursor to the beginning
of the route, and press the LEFT ARROW and
RIGHT ARROW keys to highlight POINT 1 of the route
(not the named, first waypoint of the route).
To add only part of the route, press the CURSOR PAD to
move the cursor to the desired route point, and the route
is added starting at the selected point, including all
subsequent points. This procedure also applies to
selecting a route leg: Press the CURSOR PAD to move the
cursor to the desired route leg, and the route is added
starting at the beginning point of the selected leg,
including all subsequent legs and points. Remember that
you may have to press the LEFT ARROW and RIGHT
ARROW keys to highlight the desired object on the
CHART screen.
2. Press the CURSOR menu key.
The SELECTED ROUTE POINT (or SELECTED ROUTE
LEG) dialog box appears.
961/962 Operations and Reference Manual, Rev. A