Chapter 8 - Creating Routes
List display
Page 8-4
To see the route displayed on the CHART screen, you may
have to press the OUT key or the CURSOR PAD to move into
the route's area.
The directional arrow markers on the route indicate its present
direction.
Displaying a route's name on the chart screen
You assign each route a name when you create it; see
"Creating a new route" starting on page 8-8. To see the name
of the route on the CHART screen, press the CURSOR PAD to
select any part of the route (either a leg or a point), and its
name appears in the CURSOR INFO BAR (if necessary, press
the LEFT ARROW key or RIGHT ARROW key). If you change
the CHART screen's orientation, route names remain right-side
up.
Displaying a route on the routes screen
To display a list of routes, press the WAYPTS/ROUTES key
until you reach the ROUTES screen.
Chart screen with displayed route
961/962 Operations and Reference Manual, Rev. A