Table 10: Datum List - NorthStar 961 Reference Manual

Chapter 13 - Customizing Setup Functions
Datum name
Page 13-12
3. Press the CURSOR PAD down to highlight the MANUAL
DATUM field, then press the EDIT key.
4. Press the CURSOR PAD up or down or press the ARROW
keys to scroll the list of datums, organized alphabetically
as in "Table 10: Datum list" below, and select the desired
datum.
5. When done, press the SELECT key (or CANCEL to leave
the option unchanged).
6. Press the RETURN key to go back to the SETUP MENU
screen.
The list of datums is organized alphabetically in "Table 10:
Datum list" below. Note that the deltas are the
three-dimensional offset at the center of the earth.

Table 10: Datum list

Ellipsoid delta x
(meters)
961/962 Operations and Reference Manual, Rev. A
delta y delta z
(meters) (meters)