NorthStar 961 Reference Manual page 241

Inserting a new
waypoint to the trip
961/962 Operations and Reference Manual, Rev. A
2. Use the KEYPAD to enter your desired new destination as
lat/lon, TDs, or distance and bearing.
3. Press the GO NOW key (or press the CANCEL key to
cancel).
The STEER screen appears, showing COORD as the
active waypoint, deletes any future trip points, and begins
navigating directly to the new active waypoint.
This option lets you insert a new waypoint into the trip. You
must select the active or a future trip point, since you can't ever
add a trip point to the past part of the trip:
1. At the TRIP screen, press the CURSOR PAD up or down
to select the waypoint right after the one where you want
to make the insertion. If you select the active waypoint,
the newly inserted waypoint becomes your new active
waypoint.
2. Press the GO TO NEW COORDS key.
Chapter 11 - Using the Trip Function
Active trip point dialog box
Page 11-7