NorthStar 961 Reference Manual page 115

961/962 Operations and Reference Manual, Rev. A
3. To provide a user-defined name for the waypoint, use the
KEYPAD to enter a name in the NAME field (waypoint
names can have up to nine characters); or, use the default
waypoint name, which is a W followed by four digits. If
you use the default waypoint name, you can always
change the name later on the WAYPOINTS screen. To
erase the entire NAME field, press the CLEAR ENTRY key.
4. Press the MAKE NEW WAYPOINT key (or press the
RETURN key to cancel).
The new waypoint is stored and the CHART screen is
displayed, showing the navigation information about this
new waypoint in the CURSOR INFO BAR.
Making a new avoidance point
You can create avoidance points with a user-defined name and
radius that are displayed on the CHART screen. If you try to
navigate into these areas, two alarms are displayed: One alarm
advises you that you are approaching an avoidance point
that's in your trip, and the other alarm advises you that you
are now inside the radius of an avoidance area.
Chapter 4 - Understanding the Chart Screen
Store as a waypoint dialog box
Page 4-23