NorthStar 961 Reference Manual page 332

Chapter 13 - Customizing Setup Functions
Page 13-62
Entering your NOC and user permit
To obtain a Northstar Operator Code (NOC) and user permit,
you must call the Northstar Service Department (not your
dealer), who will require your name, address, vessel name, and
961/962 serial number, before you manually enter the NOC
and user permit. It is highly recommended that you enter this
information with the assistance of the Northstar Service
Department.
To enter your NOC and user permit:
1. Press the STAR key until you reach the SETUP MENU
screen, then press the CHART INVENTORY key.
2. At the CHART INVENTORY screen, press the HCRF
SPECIFIC key to display the HCRF CHARTS screen.
3. At the HCRF CHARTS screen, press the USER PERMIT
key.
The HCRF USER PERMIT screen appears.
4. At the HCRF USER PERMIT screen, press the EDIT key (if
a valid NOC and user permit are already present, this key
won't appear).
961/962 Operations and Reference Manual, Rev. A
HCRF user permit screen